| |
|
|
Trumatic 3530 x 2 units
 |
| Working range |
X axis: 3000mm
Y axis: 1500mm
Xp axis: 300mm
Z axis: 115mm |
Xp represents a highly dynamic additional axis in the X direction – this is for faster cuts for small profiles within range of 300mm |
| Max sheet thickness |
Mild steel – 20mm (25mm Max)
Stainless steel – 15mm (20mm Max)
Aluminium – 10mm (12mm Max) |
|
| Positioning Accuracy |
±0.10mm |
|
| Repeatability Accuracy |
±0.03mm |
|
| Engineering software |
Solidedge, Solidworks, Autocad, etc |
|
| Surface finishing |
Possibility of original surface as material is stationary during laser cutting |
Only laser head is moving, good to preserve finishes of stainless steel material |
|
Trumatic 3030 x 1 unit
 |
| Working range |
X axis: 3000mm
Y axis: 1500mm
Z axis: 115mm |
|
| Max sheet thickness |
Mild steel – 20mm
Stainless steel – 9mm
Aluminium – 4mm |
|
| Positioning Accuracy |
±0.10mm |
|
| Repeatability Accuracy |
±0.03mm |
|
| Engineering software |
Solidedge, Solidworks, Autocad, etc |
|
| Surface finishing |
Possibility of original surface as material is stationary during laser cutting |
Only laser head is moving, good to preserve finishes of stainless steel material |
|
Byspeed 3015 x 1 unit
 |
| Working range |
X axis: 3000mm
Y axis: 1500mm
Z axis: 100mm |
|
| Max sheet thickness |
Mild steel – 20mm (25mm Max)
Stainless steel – 15mm (20mm Max)
Aluminium – 10mm (12mm Max) |
|
| Positioning Accuracy |
±0.10mm |
|
| Repeatability Accuracy |
±0.05mm |
|
| Engineering software |
Solidedge, Solidworks, Autocad, etc |
|
| Surface finishing |
Possibility of original surface as material is stationary during laser cutting |
Only laser head is moving, good to preserve finishes of stainless steel material |
|
|
 |
|
